Premium Polycarbonate Roofing Sheets Kenya & Architectural Solutions
Premium structural steel, hollow sections, MS plates, TMT bars, purlins, and more. KEBS-certified quality at competitive prices. Delivery across Kenya from our Nairobi warehouse.
H-beam and I-beam prices in Kenya depend on the section size, weight per metre and current mill rates, so structural steel is quoted per piece or per kilogram rather than at a single fixed price. BHD Kenya supplies KEBS-certified H-beams, I-beams, hollow sections, MS plates and TMT bars — view HR beam sizes or contact us on WhatsApp for a same-day quote.
All our steel products meet Kenya Bureau of Standards certification for structural integrity and safety compliance.
Competitive wholesale and retail pricing. Direct from manufacturers to keep costs low for your projects.
Fast delivery across Nairobi and all major towns in Kenya. Bulk orders dispatched within 24-48 hours.
Complete inventory of structural steel: hollow sections, plates, bars, purlins, beams, channels and more.
From structural hollow sections to reinforcement bars, we stock the full range of steel products needed for construction projects across Kenya.
Binding Wire — Binding Wire is soft annealed mild steel wire used to tie reinforcement bars together on construction sites. In Kenya, 16-gauge black annealed binding wire is the standard material for tying TMT rebar in columns, beams, slabs, and foundations — an essential consumable for every reinforced concrete project.
CHEQUERED PLATES — Chequered Plates are mild steel plates with a raised diamond or teardrop pattern providing anti-slip traction. In Kenya they are the standard material for industrial flooring, vehicle ramps, stair treads, walkway covers, and trailer beds where safety underfoot and load-bearing strength are critical.
CIRCULAR HOLLOW SECTION (CHS) — Circular Hollow Section (CHS) is a welded round structural steel tube used for columns, trusses, handrails, fencing, and architectural frames. In Kenya, CHS is specified for its equal strength in all directions, clean aesthetic, and efficiency in compression — making it the preferred choice for columns and trussed structures.
Circular Hollow Section CHS 16mm to 76mm — CHS 16mm to 76mm is a range of small-diameter welded round steel tubes used for fencing, handrails, gates, furniture, hydraulic lines, and light structural fabrication. In Kenya this size range is the most widely used for residential metalwork, workshop fabrication, and decorative steel applications.
HR Beams — HR Beams are hot-rolled structural steel I-beams and H-beams used as primary load-bearing members in commercial, industrial, and infrastructure construction. In Kenya they are the backbone of multi-storey buildings, warehouses, factories, and bridges — delivering maximum strength-to-weight efficiency for spanning and column applications.
HR Channel — HR Channel is a hot-rolled structural steel section with a U or C-shaped profile used for beams, columns, bracing, and industrial fabrication. In Kenya, HR Channel is specified for warehouse framing, industrial plant support, vehicle chassis, and fabricated structural connections where flanged support is required.
MS ANGLE — MS Angle (angle iron) is an L-shaped mild steel profile used for frames, brackets, supports, towers, and structural reinforcement. In Kenya it is one of the most widely specified structural members for gate frames, window grills, bed frames, tower legs, and general fabrication across every sector.
MS Flat Bars — MS Flat Bars are rectangular-cross-section mild steel bars used for fabrication, framing, and general metalwork. In Kenya they are a universal workshop consumable — essential for gate frames, window grills, bracket fabrication, stiffener strips, and virtually every kind of light steel fabrication.
MS PLATES — MS Plates are hot-rolled mild steel plates supplied in thicknesses from 3mm to 25mm+ for structural, fabrication, and industrial applications. In Kenya they are the core raw material for trailer bodies, fabricated tanks, gussets, machine bases, base plates, and heavy-duty structural fabrication.
MS TEE — MS Tee sections are T-shaped mild steel profiles used for structural framing, stiffeners, brackets, and decorative fabrications. In Kenya they are specified for gate frames, window grills, decorative metalwork, stiffener ribs, and lightweight structural support where a flanged T profile is required.
MS ZED BARS — MS Zed Bars are lightweight Z-shaped mild steel sections used for residential roofing purlins, wall framing, and small-structure support. In Kenya they are the budget-friendly alternative to full Zed Purlins for residential and small-commercial roof framing where lower spans and lighter loading apply.
RECTANGULAR HOLLOW SECTION (RHS) — Rectangular Hollow Section (RHS) is a welded rectangular steel tube used for structural beams, columns, window frames, and architectural fabrications. In Kenya, RHS is specified for applications where unequal strength in two directions is required — such as beams in bending and wide-span frames.
SQUARE HOLLOW SECTION (SHS) — Square Hollow Section (SHS) is a welded square steel tube used for structural columns, beams, trusses, fencing, and fabricated frames. In Kenya, SHS is the preferred structural member for gates, car ports, verandas, warehouse columns, and light commercial buildings where strength and clean aesthetics are required.
TMT BARS — TMT Bars (Thermo-Mechanically Treated Bars) are high-tensile deformed steel reinforcement bars used in reinforced concrete construction. In Kenya, TMT bars are the mandatory reinforcement standard for residential, commercial, and infrastructure projects under the National Building Code (2024) — delivering superior yield strength, ductility, and earthquake resistance.
ZED PURLINS — Zed Purlins are cold-formed Z-shaped galvanised steel sections used as secondary roof and wall framing. In Kenya they are the structural backbone supporting roof cladding on warehouses, factories, commercial buildings, and agricultural structures where spans, strength, and fast installation matter.
Square, rectangular, and circular hollow sections in various sizes. Ideal for structural frameworks, trusses, columns, gates, and fencing. Available from 16mm to 200mm.
SHS, RHS, CHS
Mild steel plates for fabrication, tank construction, and industrial flooring. Chequered plates provide anti-slip surfaces for walkways, ramps, and truck bodies.
MS Plates, Chequered Plates
Thermo-mechanically treated reinforcement bars for concrete structures. High tensile strength, excellent ductility, and superior bonding with concrete.
TMT Bars, Binding Wire
Galvanized zed purlins for roofing support structures. HR beams and channels for heavy-duty structural applications in commercial and industrial buildings.
Zed Purlins, HR Beams, HR Channels
MS angle bars, tees, zed bars, and flat bars for general fabrication, window frames, door frames, brackets, and structural connections.
MS Angles, MS Tee, Flat Bars, Zed Bars
Black pipes for structural and plumbing applications. Galvanized pipes for water supply, scaffolding, and corrosion-resistant installations.
Black Pipes, Galvanized Pipes
Commercial Buildings
Residential Homes
Roofing Structures
Bridges & Infrastructure
Gates & Fencing
Warehouses
Water Tanks
Industrial Fabrication
Avoid counterfeit steel. Learn how to verify and source high-quality structural steel products in Kenya for safe construction and reliable load-bearing performance.
Read More
Building a warehouse or commercial complex in Kenya? Learn the differences between HR beams and HR channels for safe and efficient structural steel design.
Read More
From security window grills to gate frames, explore how MS flat bars are used in light steel fabrication across Kenyan workshops and construction projects.
Read More
Steel products in Kenya such as TMT bars, hollow sections, beams, and purlins are essential for modern construction due to their strength, durability, and versatility across residential, commercial, and industrial projects.
Read More
Structural steel in Kenya forms the backbone of modern construction, including HR beams, hollow sections, TMT bars, and angle irons. These materials are widely used in buildings, warehouses, and infrastructure due to their strength, durability, and versatility across different construction environments.
Read More
KEBS steel standards in Kenya including KS 02-17 and building code requirements. Ensure compliance, safety, and structural integrity in construction projects with certified steel from trusted suppliers in Kenya.
Read MoreGet the best steel prices in Kenya. Free quotations, bulk discounts, and fast delivery from Nairobi to anywhere in Kenya.
Trusted Partners
